2 frames, 1 title - Page 3

Dragonpaco · 02-22-2009, 09:33 PM

i'm going for the weld on VIN, then i'll work the title shit out

ZUKIMON · 02-23-2009, 12:41 AM

Well, since we're posting all this out loud for the world to see.

The vin should be stamped in, correct? If so, then what about gently sanding it down smooth and re-stamping the new one in? This would be more work and if done properly, would be all but perfect. I realize that you could still x-ray the frame and tell that it had been changed, but unless you get in some sort of terrible crash that kills a bus load of pregnant women with small children too, then it should never get another look. ???

Dragonpaco · 02-23-2009, 12:46 AM

if i get it welded on right, it wont cause a second look. the bike wasnt stolen, the frame was paid for, and i'm only using the part of the new frame that has a title. it's the same if i got in a wreck and wanted to put another frame on it to fix it. i'd title it witht he new fram rather than the old mangled one.

ZUKIMON · 02-23-2009, 12:52 AM

Well, yes and no again. According to NC state law, the vehicle in question has to be title per the frame. This means that body swaps are allowed and do not cause any problems, but if the frame is swapped then you have to carry over the title from the new frame to the vehicle. You simply are not allowed to swap only the VIN from one to another.

I understand what you are wanting to do and I have done it myself (in a roundabout sort of way) so I don't blame you for what it is that you are doing. I too would look for the most simple way out. Just be carefull about the process so that it doesn't bite you on the ass later.

Dragonpaco · 02-23-2009, 12:56 AM

fuck it, i'm sanding off the old vin and writing the new vin on a piece of duct tape that i will slap over it and if a cop asks me if it's legit then i'm telling him it was built this way and then showing him my balls.

ZUKIMON · 02-23-2009, 01:20 AM

Quote:

Originally Posted by Dragonpaco

fuck it, i'm sanding off the old vin and writing the new vin on a piece of duct tape that i will slap over it and if a cop asks me if it's legit then i'm telling him it was built this way and then showing him my balls.

You missed what I was saying....

Quote:

I understand what you are wanting to do and I have done it myself (in a roundabout sort of way) so I don't blame you for what it is that you are doing. I too would look for the most simple way out. Just be carefull about the process so that it doesn't bite you on the ass later.

I agree with what you are doing but I knew as I was typing that last post that you would take it the wrong way. I just don't have a better way of saying...........I'd do it too and hope that I never got caught!

Dragonpaco · 02-23-2009, 01:22 AM

i hope i do get caught. i want to read in the police report "suspect stated the motorcycle was manufactured using duct tape and then proceeded to expose his testicles to me"

ZUKIMON · 02-23-2009, 01:54 AM

You da man!

rogue · 02-23-2009, 02:02 AM

Quote:

Originally Posted by ZUKIMON

You da man!

No...he's just nuckin' futs!

Do it!

Dragonpaco · 02-23-2009, 02:12 AM

steph ur gonna be my one phone call, and that call will consist of me asking if you could dress up like a cop and let me reenact the events

02-23-2009, 12:41 AM	#22
ZUKIMON Is this thing on? Join Date: Feb 2009 Location: Ashe Co, NC (Near Boone) Moto: '01, 929RR Posts: 398	Well, since we're posting all this out loud for the world to see. The vin should be stamped in, correct? If so, then what about gently sanding it down smooth and re-stamping the new one in? This would be more work and if done properly, would be all but perfect. I realize that you could still x-ray the frame and tell that it had been changed, but unless you get in some sort of terrible crash that kills a bus load of pregnant women with small children too, then it should never get another look. ??? __________________ Dirty Harry said there's nothing wrong with a little shooting, as long as the right people get shot.

02-23-2009, 12:52 AM	#24
ZUKIMON Is this thing on? Join Date: Feb 2009 Location: Ashe Co, NC (Near Boone) Moto: '01, 929RR Posts: 398	Well, yes and no again. According to NC state law, the vehicle in question has to be title per the frame. This means that body swaps are allowed and do not cause any problems, but if the frame is swapped then you have to carry over the title from the new frame to the vehicle. You simply are not allowed to swap only the VIN from one to another. I understand what you are wanting to do and I have done it myself (in a roundabout sort of way) so I don't blame you for what it is that you are doing. I too would look for the most simple way out. Just be carefull about the process so that it doesn't bite you on the ass later. __________________ Dirty Harry said there's nothing wrong with a little shooting, as long as the right people get shot.

02-23-2009, 01:54 AM	#28
ZUKIMON Is this thing on? Join Date: Feb 2009 Location: Ashe Co, NC (Near Boone) Moto: '01, 929RR Posts: 398	You da man! __________________ Dirty Harry said there's nothing wrong with a little shooting, as long as the right people get shot.