Archictects, designers, creative thinkers...

Triple · 03-01-2010, 03:18 PM

...

Krabill · 03-01-2010, 04:11 PM

Here ya go. 8 bikes and a car

Avatard · 03-01-2010, 04:11 PM

Consider making some loft stairs for your project. I designed a set, and with practice, I could actually run up and down them. The secret is making the "rise" standard, but halve the "run", and remove every other half tread (the stairs have a stringer in the center, or shaped treads, with "reliefs").

The design allows you to have a nearly-normal walking stair, in the space of what would otherwise be a ladder, by removing half of every tread (which you don't use unless you walk up an down like a five year old), so that you can walk down frontwise, with room for your heel, and not have to back down like a ladder.

CasterTroy · 03-01-2010, 04:17 PM

Shipmans ladder...but with 11ft you're cracking you head on one or BOTH levels (or at least I am.....at 6'-2")

Cutty72 · 03-01-2010, 04:17 PM

FYI a "full" bathroom with only a standup shower is not actually a "full" bath, but rather a 3/4 bath.

That is all I can add to this.

Oh, except that it must be a small car in Krabills drawing. My car is 18' bumper to bumper, and my pickup will be well over 20'!

Rider · 03-01-2010, 04:20 PM

Quote:

Originally Posted by Cutty72

FYI a "full" bathroom with only a standup shower is not actually a "full" bath, but rather a 3/4 bath.

That is all I can add to this.

Oh, except that it must be a small car in Krabills drawing. My car is 18' bumper to bumper, and my pickup will be well over 20'!

It must be a Pinto in his drawing.

Krabill · 03-01-2010, 06:04 PM

Quote:

Originally Posted by Cutty72

Oh, except that it must be a small car in Krabills drawing. My car is 18' bumper to bumper, and my pickup will be well over 20'!

It's a Jeep Cherokee. I don't care if your trucks won't fit . . . mine will

Cutty72 · 03-01-2010, 04:32 PM

Yeah but a 6.5' area below leaves you 5.5' less the floor, and less whatever insulation/ceiling you may put in the "upstairs". So, when you are done you have under 4.5'.

CasterTroy · 03-01-2010, 04:41 PM

Here you go...with ladder and stove

Tmall · 03-01-2010, 06:55 PM

Quote:

Originally Posted by Triple

My drawing is of interior dimensions; the 11 feet is from floor level to ceiling. It's 11 feet of usable space. Subtract 8-10" for the floor of the loft: 6'6" inches for the living room and... 3'8" is left for the loft.

Okay, maybe that does kinda suck.

You could make some kind of sleeping "nook" Just space for the bed, a night stand and room to roll over. This way it technically could be lower near the foot of the bed. I mean in your loft of course.

03-01-2010, 04:11 PM	#2
Krabill WERA Yellow Plate Join Date: Nov 2008 Location: Tulsa, OK Moto: 08 WR250R, 12 XTZ1200 Posts: 558	Here ya go. 8 bikes and a car __________________ www.wrrdualsport.com www.designatedvaping.com

03-01-2010, 04:11 PM	#3
Avatard Crotch Rocket Curmudgeon Join Date: Nov 2008 Location: Here to integrity Moto: Li'l red baby Ninja Posts: 7,482	Saving space on stairs Consider making some loft stairs for your project. I designed a set, and with practice, I could actually run up and down them. The secret is making the "rise" standard, but halve the "run", and remove every other half tread (the stairs have a stringer in the center, or shaped treads, with "reliefs"). The design allows you to have a nearly-normal walking stair, in the space of what would otherwise be a ladder, by removing half of every tread (which you don't use unless you walk up an down like a five year old), so that you can walk down frontwise, with room for your heel, and not have to back down like a ladder. __________________ Insert free thought here. Last edited by Avatard; 03-01-2010 at 04:23 PM..

03-01-2010, 04:17 PM	#4
CasterTroy ................ Join Date: Nov 2008 Location: NC Posts: 3,028	Shipmans ladder...but with 11ft you're cracking you head on one or BOTH levels (or at least I am.....at 6'-2") __________________ “Being tolerant does not mean that I share another one’s belief. But it does mean that I acknowledge another one’s right to believe, and obey, his own conscience.” Viktor Frankl

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode