check old some old & extremely rare engines I started on saturday

'73 H1 Triple · 10-16-2011, 09:49 AM

I helped my friend Roger at the Fall Harvest Show at Rough & Tumble in Kinzers Pa ( he had surgery a month ago and isn't up to heavy pulling to start the engines )

I got to start some very rare ( and expensive ) engines today.

Started off with two hot air engines, a 4" Rider & Ericson

and a 8" made by American Machine Company ( if I remember correctly-my info pic didn't turn out clear )

I learned all the oil points including oiling the pistons before starting them. Both of these have propane burners and started quite easily once they warmed up. These engines would be used to pump water.

~~~~

Then it was onto the 10 hp White and Middleton which also runs on Propane. This is a hot tube engine.

This was a little more difficult to start but caught and started after about 6 or 7 revolutions. This was the first 10 hp I've started.

~~

The it was onto the Otto and Langen. This is one of the earliest engines around, it was built in 1869 This one runs on hydrogen gas and actually started quite easily. This is a very unique engine as the flame is transfered in a block to the combustion chamber where it ignites the charge. The resulting controlled explosion drives the piston / gear rack assembly up and between the weight of the assembly, the vacuum of the cooling charge and the movement of the rachet assemble, it drives the flywheel.

I was lucky enough to start this engine three times today.

The rachet assembly drops the piston as the flame pocket moves to the combustion chamber

and it drives the rack up

1868 Otto Langen - Oldest running gas engine in the USA - YouTube

~~

Then later in the morning we got the 10 hp Springfield running. Lots of oilers and places to oil.

Built in 1897 and it's overhead cam and fuel injected

azoomm · 10-16-2011, 10:37 AM

Holy crap that's cool...

Particle Man · 10-16-2011, 10:56 AM

Kick ass

There are some old farms around here that have stuff like that but very few run. Very cool.

anthonyk · 10-16-2011, 02:20 PM

Awesome, thanks!

Gas Man · 10-16-2011, 04:21 PM

Wow!!

'73 H1 Triple · 10-16-2011, 06:17 PM

Quote:

Originally Posted by azoomm

Holy crap that's cool...

That fan is pretty cool. It's a hot air design to move the mechanism and it worked really well.

Krypt Keeper · 10-17-2011, 09:30 AM

Now thats some great looking engines from back in the day.

Wanna help me with my '29 "A"

Particle Man · 10-17-2011, 10:20 AM

Quote:

Originally Posted by Krypt Keeper

Now thats some great looking engines from back in the day.

Wanna help me with my '29 "A"

Damn, that must be fun to dig into

Adeptus_Minor · 10-17-2011, 11:35 AM

That is, like, steampunk awesome.

There needs to be more brass and gauges, though.

AquaPython · 10-17-2011, 03:43 PM

cool chit!

10-16-2011, 09:49 AM	#1
'73 H1 Triple restorer of the original Join Date: Mar 2008 Location: Zionsville,PA Moto: '93 ZR1100 &'73 Kawasaki H1 500 Posts: 1,331	check old some old & extremely rare engines I started on saturday I helped my friend Roger at the Fall Harvest Show at Rough & Tumble in Kinzers Pa ( he had surgery a month ago and isn't up to heavy pulling to start the engines ) I got to start some very rare ( and expensive ) engines today. Started off with two hot air engines, a 4" Rider & Ericson and a 8" made by American Machine Company ( if I remember correctly-my info pic didn't turn out clear ) I learned all the oil points including oiling the pistons before starting them. Both of these have propane burners and started quite easily once they warmed up. These engines would be used to pump water. ~~~~ Then it was onto the 10 hp White and Middleton which also runs on Propane. This is a hot tube engine. This was a little more difficult to start but caught and started after about 6 or 7 revolutions. This was the first 10 hp I've started. ~~ The it was onto the Otto and Langen. This is one of the earliest engines around, it was built in 1869 This one runs on hydrogen gas and actually started quite easily. This is a very unique engine as the flame is transfered in a block to the combustion chamber where it ignites the charge. The resulting controlled explosion drives the piston / gear rack assembly up and between the weight of the assembly, the vacuum of the cooling charge and the movement of the rachet assemble, it drives the flywheel. I was lucky enough to start this engine three times today. The rachet assembly drops the piston as the flame pocket moves to the combustion chamber and it drives the rack up 1868 Otto Langen - Oldest running gas engine in the USA - YouTube ~~ Then later in the morning we got the 10 hp Springfield running. Lots of oilers and places to oil. Built in 1897 and it's overhead cam and fuel injected

10-16-2011, 04:21 PM	#5
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Wow!! __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

10-17-2011, 11:35 AM	#9
Adeptus_Minor Hopster Join Date: Nov 2008 Location: Austin, TX Moto: 2009 Buell 1125R Posts: 4,743	That is, like, steampunk awesome. There needs to be more brass and gauges, though. __________________ “Well, obviously before; after was all gendarmes and dick stitches.”

10-16-2011, 10:37 AM	#2
azoomm moderator chick Join Date: Feb 2008 Location: Hill Country TX Moto: Pasta Rockets Posts: 8,917	Holy crap that's cool...

10-16-2011, 10:56 AM	#3
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	Kick ass There are some old farms around here that have stuff like that but very few run. Very cool.

10-16-2011, 02:20 PM	#4
anthonyk WERA White Plate Join Date: Nov 2008 Location: Austin, TX Moto: '01 Aprilia Falco Posts: 1,041	Awesome, thanks!

10-17-2011, 09:30 AM	#7
Krypt Keeper Kneedragger Join Date: Feb 2009 Location: VA Moto: CBR1100XX, Daytona 600 Posts: 174	Now thats some great looking engines from back in the day. Wanna help me with my '29 "A"