Tips for cutting fairing for frame slider?

derf · 07-19-2009, 02:43 AM

Any tips for cutting the fairing to fit a set of frame sliders?

Amber Lamps · 07-19-2009, 03:22 AM

Quote:

Originally Posted by derf

Any tips for cutting the fairing to fit a set of frame sliders?

Yep! This is the official CEO method! Put the bike on a stand and take the fairing off. Get a laser pointer and set it up to shine in the exact center of the bolt where you are going to mount the slider, use a step ladder or something. Give yourself plenty of room. Now put the fairing back on and mark where the laser is pointing and cut your hole using that mark as the center with the appropriate sized hole saw. Repeat for the other side. Ta-dah!!!

t-homo · 07-19-2009, 03:28 AM

Quote:

Originally Posted by TIGGER

Yep! This is the official CEO method! Put the bike on a stand and take the fairing off. Get a laser pointer and set it up to shine in the exact center of the bolt where you are going to mount the slider, use a step ladder or something. Give yourself plenty of room. Now put the fairing back on and mark where the laser is pointing and cut your hole using that mark as the center with the appropriate sized hole saw. Repeat for the other side. Ta-dah!!!

That guy can be pretty fucking smart sometimes.

Rider · 07-19-2009, 03:35 AM

Quote:

Originally Posted by TIGGER

Yep! This is the official CEO method! Put the bike on a stand and take the fairing off. Get a laser pointer and set it up to shine in the exact center of the bolt where you are going to mount the slider, use a step ladder or something. Give yourself plenty of room. Now put the fairing back on and mark where the laser is pointing and cut your hole using that mark as the center with the appropriate sized hole saw. Repeat for the other side. Ta-dah!!!

Get the fuck out.Fit your sliders. Color the end of the sliders with chalk. Mount your fairings, press the fairning against the sliders to transfer the chalk mark. Drill hil where the chalk mark is. Remove sliders, fit fairings, fit sliders, you're golden.

derf · 07-19-2009, 10:51 AM

I was thinking I would take the old fairing, trace the cut outs on a piece of paper, then mark it on the new fairing. Then make a small hole, and progressivelly file the hole bigger until it fits around the slider

Sixxxxer · 07-19-2009, 11:56 AM

This isn't brain surgery...Find out where your bolt hole is for it then line up the slider and make a circle....It isnt that difficult.

Amber Lamps · 07-19-2009, 01:01 PM

Do what you want but I did my buddy's the laser way and they are fucking perfect!!! Plus I don't see how my way is any more difficult than what you've all suggested?

Sixxxxer · 07-19-2009, 01:04 PM

Mine took all of 5 minutes...and I left the fairing on the bike...

Amber Lamps · 07-19-2009, 01:10 PM

Whatever, show me a better installed frame slider!

Sixxxxer · 07-19-2009, 01:12 PM

Mine is only a half circle

07-19-2009, 02:43 AM	#1
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	Tips for cutting fairing for frame slider? Any tips for cutting the fairing to fit a set of frame sliders? __________________

07-19-2009, 10:51 AM	#5
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	I was thinking I would take the old fairing, trace the cut outs on a piece of paper, then mark it on the new fairing. Then make a small hole, and progressivelly file the hole bigger until it fits around the slider __________________

07-19-2009, 11:56 AM	#6
Sixxxxer Like Gixxxxer But Not Join Date: Jul 2008 Location: Dirty Jersey Moto: 2008 ZX6R Posts: 4,891	This isn't brain surgery...Find out where your bolt hole is for it then line up the slider and make a circle....It isnt that difficult. __________________ [FRSH] Candy Plasma Blue

07-19-2009, 01:04 PM	#8
Sixxxxer Like Gixxxxer But Not Join Date: Jul 2008 Location: Dirty Jersey Moto: 2008 ZX6R Posts: 4,891	Mine took all of 5 minutes...and I left the fairing on the bike... __________________ [FRSH] Candy Plasma Blue

07-19-2009, 01:12 PM	#10
Sixxxxer Like Gixxxxer But Not Join Date: Jul 2008 Location: Dirty Jersey Moto: 2008 ZX6R Posts: 4,891	Mine is only a half circle __________________ [FRSH] Candy Plasma Blue

07-19-2009, 01:01 PM	#7
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	Do what you want but I did my buddy's the laser way and they are fucking perfect!!! Plus I don't see how my way is any more difficult than what you've all suggested?

07-19-2009, 01:10 PM	#9
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	Whatever, show me a better installed frame slider!