Go Back   Two Wheel Fix > General > Cage Hell > Cage Tech

Reply
 
Thread Tools Display Modes
Old 03-17-2010, 02:28 AM   #1
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default Bleeding Power Steering on Ford F-150?

Can someone post the service manual procedure on how to bleed the power steering on a 2006 F-150?

The cap was loose and fluid splilled out the reservoir (well my bud was using the truck and that is what he told mes). Filled it up and turned the wheel side to side about 20 times, but at idle the steering is hard in some spots. Tried picking up the front wheels and doing the same thing. A tad better, but no luck. If it's just a gravity feed system (like most), I'll have to replace the pump for 70 bucks, but I think these pumps are known junk.
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Old 03-17-2010, 04:17 AM   #2
Homeslice
Elitist
 
Homeslice's Avatar
 
Join Date: Nov 2008
Location: SF Bay Area
Moto: Gix 750
Posts: 11,351
Default

Why do you necessarily have to replace the pump?

If you're gonna replace all the fluid, use Redline steering fluid, it doesn't cavitate as much as the oem stuff.
Homeslice is offline   Reply With Quote
Old 03-17-2010, 10:34 AM   #3
Speedracer42
Kneedragger
 
Join Date: Jun 2009
Location: PDX
Posts: 170
Default

There are several aftermarket additives that lubricate and condition Ford pumps. And they work VERY well. There is no bleeding necessary. Fill with fluid and you are done. Sometimes they will make noise for a bit until any air is worked out of the system but thats it. But again before spending money and labor on a pump try a $10 additive first.
Speedracer42 is offline   Reply With Quote
Old 03-17-2010, 03:41 PM   #4
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default

Quote:
Originally Posted by Homeslice View Post
Why do you necessarily have to replace the pump?

If you're gonna replace all the fluid, use Redline steering fluid, it doesn't cavitate as much as the oem stuff.
No.....either my bud or a shop left the cap off. The fluid squirted out until the power steering stopped working at idle. My bud filled up the fluid, but the steering assist effort goes in and out at idle.
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Old 03-17-2010, 03:42 PM   #5
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default

Quote:
Originally Posted by Speedracer42 View Post
There are several aftermarket additives that lubricate and condition Ford pumps. And they work VERY well. There is no bleeding necessary. Fill with fluid and you are done. Sometimes they will make noise for a bit until any air is worked out of the system but thats it. But again before spending money and labor on a pump try a $10 additive first.
Do you know of any in particular?

I'll try the Redline fluid and an additive.
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:26 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.