Amals - Mikuni

Digifox · 05-13-2009, 12:41 AM

Okay so Im tired of the EX250 being NOTHING but one big problem.
SO im going to ride the Triumph And put a set of Mikuni VM34 carbs on it
No their not flat slides and yes their old ass hell

But the reasons im using them:
1.I already have one
2.The Kit Sudco sells are VM32's
3.I use one and its easy to tune ^__^

No i just have a Question There are OEM Intake manifolds that i guess are used for conversions. and they are $24.99 Each (and their aluminum so they need a Dammed boot)

And there is Also a Set of VM34 manifolds for an XS650 (they are like a dirtbike intake) http://www.sportingforless.com/Manif...etor-p/c14.htm

Would those fit on the Bonneville?

Thanks guys.
And sorry for all the stupid threads.

askmrjesus · 05-13-2009, 10:37 AM

The XS650 manifolds might fit, but you need to check the "footprint" and the bolt centers- (the XS centers are 70mm)

http://www.motocarb.co.uk/index.php?_a=viewCat&catId=7

JC

Digifox · 05-13-2009, 12:50 PM

Quote:

Originally Posted by askmrjesus

The XS650 manifolds might fit, but you need to check the "footprint" and the bolt centers- (the XS centers are 70mm)

http://www.motocarb.co.uk/index.php?_a=viewCat&catId=7

JC

Thanks ^__^

Digifox · 05-13-2009, 04:06 PM

Well Crap.
The Bonneville has 50.88mm bolt spacing.
And the adapters Sudco sells are freaki $98 EACH!

Anyone have sizes on the Speedmaster intake?

BobTheBiker · 05-13-2009, 04:25 PM

heres some advice. stop screwing with the ancient thing, sell both and buy a newer 500R. problem solved.

askmrjesus · 05-13-2009, 04:29 PM

Quote:

Originally Posted by Digifox

Well Crap.
The Bonneville has 50.88mm bolt spacing.

I believe that's commonly known in England, as two inches...

JC

Digifox · 05-13-2009, 05:45 PM

Quote:

Originally Posted by askmrjesus

I believe that's commonly known in England, as two inches...

JC

Yes sir it is...lol

EDIT:

Wow i feel fuckin retarded now...
I didnt even see the 50.8mm ones for the t20 >__< *dumbass momment*

askmrjesus · 05-13-2009, 07:13 PM

Quote:

Originally Posted by Digifox

I didnt even see the 50.8mm ones for the t20 >__< *dumbass momment*

Those are a smaller bore, you need a 34mm bore.

A strait connector would work, if your existing manifolds are the same OD as the VM34's. Britcycles.com has some adapter kits that might work for low $$$.

JC

Digifox · 05-13-2009, 07:36 PM

Quote:

Originally Posted by askmrjesus

Those are a smaller bore, you need a 34mm bore.

A strait connector would work, if your existing manifolds are the same OD as the VM34's. Britcycles.com has some adapter kits that might work for low $$$.

JC

No...The Amal manifolds i have are maybe 28mm

And the ONLY 2" centre - Spigot adapters are $78-108

But a Trip to Ask & Ironpony might be worth it to see if i can get a Mikuni mounting Flange for like an ATV/Jet Ski

was92v · 05-13-2009, 09:48 PM

Are you guys talking about the hose (Yes..I said Hose) between the manifold and the carb inlet?

05-13-2009, 12:41 AM	#1
Digifox Cl4p-Trap Join Date: Nov 2008 Location: Columbus, Ohio Moto: Your mom. Posts: 734	Amals - Mikuni Okay so Im tired of the EX250 being NOTHING but one big problem. SO im going to ride the Triumph And put a set of Mikuni VM34 carbs on it No their not flat slides and yes their old ass hell But the reasons im using them: 1.I already have one 2.The Kit Sudco sells are VM32's 3.I use one and its easy to tune ^__^ No i just have a Question There are OEM Intake manifolds that i guess are used for conversions. and they are $24.99 Each (and their aluminum so they need a Dammed boot) And there is Also a Set of VM34 manifolds for an XS650 (they are like a dirtbike intake) http://www.sportingforless.com/Manif...etor-p/c14.htm Would those fit on the Bonneville? Thanks guys. And sorry for all the stupid threads. __________________ Firm as cherries.

05-13-2009, 10:37 AM	#2
askmrjesus Soul Man Join Date: Nov 2008 Location: Everywhere, all the time. Moto: '0000 Custom Turbo Cross (with jet kit). Posts: 6,481	The XS650 manifolds might fit, but you need to check the "footprint" and the bolt centers- (the XS centers are 70mm) http://www.motocarb.co.uk/index.php?_a=viewCat&catId=7 JC __________________ The way things are going, they're gonna crucify me.

05-13-2009, 04:06 PM	#4
Digifox Cl4p-Trap Join Date: Nov 2008 Location: Columbus, Ohio Moto: Your mom. Posts: 734	Well Crap. The Bonneville has 50.88mm bolt spacing. And the adapters Sudco sells are freaki $98 EACH! Anyone have sizes on the Speedmaster intake? __________________ Firm as cherries.

05-13-2009, 09:48 PM	#10
was92v Nowhere Man Join Date: Nov 2008 Posts: 558	Are you guys talking about the hose (Yes..I said Hose) between the manifold and the carb inlet? Last edited by was92v; 05-14-2010 at 08:24 PM..

05-13-2009, 04:25 PM	#5
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	heres some advice. stop screwing with the ancient thing, sell both and buy a newer 500R. problem solved.