Ton'in up

Dave · 03-26-2009, 01:15 AM

figured id throw up a thread about my halfassed resto/cafe conversion to my cm450. first a brief history: i got her off of a guy i went to iraq with to the tune of around $250. it had been sitting outside and hadnt been registered since the early 90's! put some air in the (very flat) tires, threw in a new battery and plugs and swapped out the ancient gas with fresh premium and she fired right up

i really hated the custom look so i scooped up some flat bars which not only made her far better looking but much easier to ride.

made a couple other improvements, mirrors never fit wit the new bars so i eightysixed 'em. also lost the sissy bar and spent a lot of time cleaning, de rusting, and painting. also de baffled the stock pipes so the system is now open and straight with a rather unneeded crossover

took it to my car club meet two weeks ago and snapped the throttle cable, limped her home and parked her for a bit. anyway since i had to order one part ive been racking up goodies that ought to make it more interesting. so far ive ordered a new cable, pod filters, clubman bars, oil filter etc.. also have some new bar ends for her cause im putting the 954's stock grips on the new bars when they show up. still looking for a good deal on header wrap, tires, carb rebuild kit, and maybe some more enticing sprockets. coming soon

derf · 03-26-2009, 01:30 AM

get rid of that seat, and make it a solo seat with a little hump where the back seat is and you might have a nice little project

Amber Lamps · 03-26-2009, 01:30 AM

Suggestion.... $25

http://www.d2moto.com/Items/m040-bla...0End%20Mirrors

Dave · 03-26-2009, 01:36 AM

Quote:

Originally Posted by derf

get rid of that seat, and make it a solo seat with a little hump where the back seat is and you might have a nice little project

seat is staying for now, might try ditching it for an older flat honda seat + cowl though.

and tiggs, ive seen those but im not crazy about em. looking for other options

derf · 03-26-2009, 01:39 AM

in jersey the requirement is for one mirror, and it doesn't have to be in any sort of place that you can see behind you, just pop something on there with a short stalk then

Amber Lamps · 03-26-2009, 01:48 AM

Suggestion... buy a can of rustoleum engine paint in flat black and hit the engine,frame,etc. Also,run sb foot pegs straight from the mounts and get a shorter shifter. You'll have to figure something for the rear brake,if you even use it. I agree with the seat idea. Take it to an upholstery guy,he could easily and cheaply,shave the rear portion of the seat and re-cover it for you. loose the fender,use a cruiser or trailer aftermarket tail light and mount it under the seat. Cut and paint the chain guard. Lose the turning signals. Get some surface mount leds and attach them under the seat and to the bar end mirrors (run the wire down the handle bar if you're feelin' frisky)

Amber Lamps · 03-26-2009, 01:49 AM

Quote:

Originally Posted by Dave

seat is staying for now, might try ditching it for an older flat honda seat + cowl though.

and tiggs, ive seen those but im not crazy about em. looking for other options

Oops so much for my turning signal idea...

Amber Lamps · 03-26-2009, 01:51 AM

Ok... $79

http://advanceauto.shoplocal.com/adv...toreid=2370190

Dave · 03-26-2009, 02:15 AM

Quote:

Originally Posted by TIGGER

Suggestion... buy a can of rustoleum engine paint in flat black and hit the engine,frame,etc. Also,run sb foot pegs straight from the mounts and get a shorter shifter. You'll have to figure something for the rear brake,if you even use it. I agree with the seat idea. Take it to an upholstery guy,he could easily and cheaply,shave the rear portion of the seat and re-cover it for you. loose the fender,use a cruiser or trailer aftermarket tail light and mount it under the seat. Cut and paint the chain guard. Lose the turning signals. Get some surface mount leds and attach them under the seat and to the bar end mirrors (run the wire down the handle bar if you're feelin' frisky)

that actually sounds not too far off. ive got a friend who powdercoats and also has a massive media blast cabinet so at some point in the season id like to tear it all down, blast it and paint it. then i ought to be able to make radical changes. still using it for training the gf at the moment so besides the clubman's i dont want to noodle with the controls too much

Amber Lamps · 03-26-2009, 02:20 AM

Quote:

Originally Posted by Dave

that actually sounds not too far off. ive got a friend who powdercoats and also has a massive media blast cabinet so at some point in the season id like to tear it all down, blast it and paint it. then i ought to be able to make radical changes. still using it for trianing the gf at the moment so besides the clubman's i dont want to noodle with the controls too much

Okay...here goes,get the light-up bar ends and use those for turning signals.....

03-26-2009, 01:15 AM	#1
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	Ton'in up figured id throw up a thread about my halfassed resto/cafe conversion to my cm450. first a brief history: i got her off of a guy i went to iraq with to the tune of around $250. it had been sitting outside and hadnt been registered since the early 90's! put some air in the (very flat) tires, threw in a new battery and plugs and swapped out the ancient gas with fresh premium and she fired right up i really hated the custom look so i scooped up some flat bars which not only made her far better looking but much easier to ride. made a couple other improvements, mirrors never fit wit the new bars so i eightysixed 'em. also lost the sissy bar and spent a lot of time cleaning, de rusting, and painting. also de baffled the stock pipes so the system is now open and straight with a rather unneeded crossover took it to my car club meet two weeks ago and snapped the throttle cable, limped her home and parked her for a bit. anyway since i had to order one part ive been racking up goodies that ought to make it more interesting. so far ive ordered a new cable, pod filters, clubman bars, oil filter etc.. also have some new bar ends for her cause im putting the 954's stock grips on the new bars when they show up. still looking for a good deal on header wrap, tires, carb rebuild kit, and maybe some more enticing sprockets. coming soon

03-26-2009, 01:30 AM	#2
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	get rid of that seat, and make it a solo seat with a little hump where the back seat is and you might have a nice little project __________________

03-26-2009, 01:39 AM	#5
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	in jersey the requirement is for one mirror, and it doesn't have to be in any sort of place that you can see behind you, just pop something on there with a short stalk then __________________

03-26-2009, 01:48 AM	#6
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	Suggestion... buy a can of rustoleum engine paint in flat black and hit the engine,frame,etc. Also,run sb foot pegs straight from the mounts and get a shorter shifter. You'll have to figure something for the rear brake,if you even use it. I agree with the seat idea. Take it to an upholstery guy,he could easily and cheaply,shave the rear portion of the seat and re-cover it for you. loose the fender,use a cruiser or trailer aftermarket tail light and mount it under the seat. Cut and paint the chain guard. Lose the turning signals. Get some surface mount leds and attach them under the seat and to the bar end mirrors (run the wire down the handle bar if you're feelin' frisky)