Help Installing Flushmounts

NONE_too_SOFT · 05-11-2008, 06:42 PM

I'm stuck trying to get the front fairing off my bike. I've taken the three bolts on the outside of the fairing off, and i've taken the two large bolts that hold the front off as well, but i cant seem to figure it out. I know there are a lot of plastic screws and such holding stuff together, but i've never messed with these before and dont know exactly how to get them off. can anybody shed some light on the situation?

dReWpY · 05-11-2008, 06:46 PM

the plastic tabs and screws suck balls, the only down side on the hondas are those damn psuch rivots

DLIT · 05-11-2008, 06:47 PM

Push rivots are easy as fuck to take out. Just push the center part inward and pull the whole thing out.

NONE_too_SOFT · 05-11-2008, 06:49 PM

yea thats what i thought, but hows bout the little guys w/ the phillips head? fucking turn those things forever and nothing happens (yes i know they arent screws)

DLIT · 05-11-2008, 07:03 PM

Turn them until they rise a little bit and then pry the base up and out. Real easy.

NONE_too_SOFT · 05-11-2008, 07:06 PM

Quote:

Originally Posted by DLIT

Turn them until they rise a little bit and then pry the base up and out. Real easy.

thx again dlit.

DLIT · 05-11-2008, 07:08 PM

Quote:

Originally Posted by NONE_too_SOFT

thx again dlit.

Word. Can't tell you how long it took me to realize you just had to push the center of the push rivots in. I felt like a new man when I discovered that.

NONE_too_SOFT · 05-11-2008, 07:14 PM

i can relate.

i fucking hate asking stupid questions like that, but ffs trying to force one little thing like that can end up costing you 800 dollars in the long run if you fuck something else up.

Mrs. Colleen · 05-11-2008, 07:28 PM

Service Manual FTW.

I could not get the tail off my bike the other day...looked in the book...you have to take other pieces off first and there are sneaky little tabs in weird places.

Phenix_Rider · 05-11-2008, 08:31 PM

Quote:

Originally Posted by Mrs. Colleen

Service Manual FTW.

I could not get the tail off my bike the other day...looked in the book...you have to take other pieces off first and there are sneaky little tabs in weird places.

Ditto with the uppers on mine. There are three screws underneath pieces where you'd never think to look. One goes to a frame tab, and two go to the headlight surround. Try to force it, and *SNAP*. Luckily, mine was broken the first time I took it off and I could see everything.

05-11-2008, 06:42 PM	#1
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	Help Installing Flushmounts I'm stuck trying to get the front fairing off my bike. I've taken the three bolts on the outside of the fairing off, and i've taken the two large bolts that hold the front off as well, but i cant seem to figure it out. I know there are a lot of plastic screws and such holding stuff together, but i've never messed with these before and dont know exactly how to get them off. can anybody shed some light on the situation?

05-11-2008, 06:47 PM	#3
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	Push rivots are easy as fuck to take out. Just push the center part inward and pull the whole thing out. __________________ Dress for the crash. Not the ride.

05-11-2008, 07:03 PM	#5
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	Turn them until they rise a little bit and then pry the base up and out. Real easy. __________________ Dress for the crash. Not the ride.

05-11-2008, 06:49 PM	#4
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	yea thats what i thought, but hows bout the little guys w/ the phillips head? fucking turn those things forever and nothing happens (yes i know they arent screws)

05-11-2008, 07:14 PM	#8
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	i can relate. i fucking hate asking stupid questions like that, but ffs trying to force one little thing like that can end up costing you 800 dollars in the long run if you fuck something else up.

05-11-2008, 07:28 PM	#9
Mrs. Colleen Leather and Lace Join Date: Feb 2008 Location: Goleta, Ca Moto: 2005 R6 Posts: 1,810	Service Manual FTW. I could not get the tail off my bike the other day...looked in the book...you have to take other pieces off first and there are sneaky little tabs in weird places.