Go Back   Two Wheel Fix > Riding > Track

Reply
 
Thread Tools Display Modes
Old 02-17-2009, 09:12 PM   #11
was92v
Nowhere Man
 
Join Date: Nov 2008
Posts: 558
Default

Quote:
Originally Posted by OreoGaborio View Post
you dragged an RD350? No shit, a buddy of mine used to drag an RD350 back in the day.

EDIT: Just looked it up, he had that thing do a friggin 11.08 at 118 mph! But it was hardly an RD anymore. Set a couple nat'l records with it.
Yeah, mine was just a hillbilly hot rod. It would have gone a lot faster, but I didn't get the timing sorted out until I went road racing with that engine. The best I ever did was like 11.95 at 110, but I had the timing way more advanced that I should have and it just killed the top end. It should have run mid to low 11s but, Oh well.
So who is your buddy? Maybe I know the name.
I guess the fastest RD I ever saw run was Tom Turner out of CA. It seems like he was putting his in the low 10s or high 9s at 140+ back then. Pretty awesome runs for a little twin.

Last edited by was92v; 05-14-2010 at 08:24 PM..
was92v is offline   Reply With Quote
Old 02-17-2009, 10:24 PM   #12
Dnyce
flyin high
 
Dnyce's Avatar
 
Join Date: Mar 2008
Location: cali
Moto: 10speed huffy w/cards in the spokes
Posts: 2,318
Default

Quote:
Originally Posted by marko138 View Post
I'm pretty sure he's a legit drag racer...not some street hooligan.
thanks

yea i drag my bike, although i only call it my racebike to set it apart from my daily ride. only difference from when i rode it on the street everyday is its a lil lower. still registered, street tire, no wheelie bars, nothing special, its a streetbike. i wanna run my 750(all stock, cept for a slip on), but i havent had a chance yet, maybe in march.

its a hi 9sec bike-i think i can get the 750 in the mid 10's, but idk
__________________
"Racing Is Life, Everything Before and After is Just Waiting" Steve McQueen
Dnyce is offline   Reply With Quote
Old 02-17-2009, 11:44 PM   #13
ZUKIMON
Is this thing on?
 
ZUKIMON's Avatar
 
Join Date: Feb 2009
Location: Ashe Co, NC (Near Boone)
Moto: '01, 929RR
Posts: 398
Default

was92v, very cool pic dude! [thumbsup] I knew it had to be an RD. I had no idea that those things were that popular. I have been told that the same engine was used in the Banshee quad. ??? I had a built Banshee a few years back that would have done well on something like that, I guess. It sure as hell didn't do so good here in the woods trying to ride with these suckers on their 4 stroke hay haulers.
ZUKIMON is offline   Reply With Quote
Old 02-18-2009, 12:56 AM   #14
was92v
Nowhere Man
 
Join Date: Nov 2008
Posts: 558
Default

Quote:
Originally Posted by ZUKIMON View Post
was92v, very cool pic dude! [thumbsup] I knew it had to be an RD. I had no idea that those things were that popular. I have been told that the same engine was used in the Banshee quad. ??? I had a built Banshee a few years back that would have done well on something like that, I guess. It sure as hell didn't do so good here in the woods trying to ride with these suckers on their 4 stroke hay haulers.
Thanks. I thought the bike looked better without the home made body on it. I'll have to dig out some pics and scan them. My RD350s were the 73-75' air cooled engines.

The banshee used the water cooled RZ350 engine. I imagine a built (or stock for that matter) RZ350 motored anything would be a handful in the woods. BUT, when the trees thinned out you could wave bye-bye to the 4 strokes, IF you could take a hand off the bars while it was roosting thru the power band...
was92v is offline   Reply With Quote
Old 02-18-2009, 01:13 AM   #15
ZUKIMON
Is this thing on?
 
ZUKIMON's Avatar
 
Join Date: Feb 2009
Location: Ashe Co, NC (Near Boone)
Moto: '01, 929RR
Posts: 398
Default

Oh dude, I made a brand new Rincon 500 look sooooooooo stupid on the highway one day with the 'shee that he went and traded it a few weeks later. I don't know the extent of what was done to that 'shee before I got it but it was damn fast. Almost too fast to be ridden for fun.

PO said it had been bored with flat tops, Weisco Hot Rods, some type of porting on the jug, race cut tranny and I can't for the life of me remember what kind of exhaust it had on it but it sounded uber kewl. It had +2 front arms, +4 rear axle and rode like a cadi in the woods but I just couldn't ride it fast enough to keep her cool. It would get hot and start pinging on me unless I could wind it out for a while. I knew better than to try to ride it where I was, but it was priceless watching those guys behind me looking for cover when I would start slinging rocks at them.
__________________
Dirty Harry said there's nothing wrong with a little shooting, as long as the right people get shot.
ZUKIMON is offline   Reply With Quote
Old 02-18-2009, 11:02 AM   #16
OreoGaborio
Tony's Crack Pusher
 
OreoGaborio's Avatar
 
Join Date: Aug 2008
Location: Topsfield MA
Moto: 2003 Aprilia Tuono (street/track days), 2006 SV650 (race)
Posts: 428
Default

Quote:
Originally Posted by was92v View Post
Yeah, mine was just a hillbilly hot rod. It would have gone a lot faster, but I didn't get the timing sorted out until I went road racing with that engine. The best I ever did was like 11.95 at 110, but I had the timing way more advanced that I should have and it just killed the top end. It should have run mid to low 11s but, Oh well.
So who is your buddy? Maybe I know the name.
I guess the fastest RD I ever saw run was Tom Turner out of CA. It seems like he was putting his in the low 10s or high 9s at 140+ back then. Pretty awesome runs for a little twin.
Very cool.

My buddy's name is Mark Boulduke (sp?). The 11.08 was his best bracket run, but I'm pretty sure he pulled a low 10 when doing an exhibition run on nitro but I can't confirm that w/o asking him. Don't think he ever broke into the 9's.
__________________
-Pete
LRRS/CCS#187 ECK-Racing, Ironstone Ventures, Tony's Track Days, SV Racer
Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | Moon Performance | RJ's Motorsport | Motorcycles of Manchester | MTAG-Pirelli

The Garage: '03 Tuono (Hooligan bike :naughty) | '06 SV650 (race)
OreoGaborio is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.