Another addition for my home shop - Page 2

Apoc · 09-12-2012, 01:52 PM

Awesome, as a machinist, I would love my own lathe. I've bid on a couple, but no luck.

derf · 09-12-2012, 02:01 PM

Quote:

Originally Posted by Apoc

Awesome, as a machinist, I would love my own lathe. I've bid on a couple, but no luck.

I used a drill with a threaded rod in the chuck clamped to my work bench with a 2x4 as a tool support as a lathe yesterday. I would love my own lathe too

It was possibly somewhat dangerous

azoomm · 09-12-2012, 02:29 PM

Quote:

Originally Posted by '73 H1 Triple

Thanks. I've been fabbing some parts for the IH built Cub Cadets plus some Kawasaki Triple parts.

Just started making exhaust manifolds for the H1 500 & H2 750 triples for the folks that have Denco & Wirges expansion chambers

Nicely done! Have you done any work for the guys at Horsepower Farm here in Austin? They do all the older-kooky work. And, they are always on the hunt for guys willing to do older-awesome-kooky parts.

'73 H1 Triple · 09-12-2012, 09:28 PM

Quote:

Originally Posted by azoomm

Nicely done! Have you done any work for the guys at Horsepower Farm here in Austin? They do all the older-kooky work. And, they are always on the hunt for guys willing to do older-awesome-kooky parts.

Thanks, I take pride in the parts I make ( both at work and at home ). I'll have to contact them after I get the lathe home and make sure it works correctly.

Jeff

Apoc · 09-13-2012, 11:36 AM

Is that Stock Saw (the one you call an automatic hacksaw) something you put together yourself?

'73 H1 Triple · 09-13-2012, 07:59 PM

Quote:

Originally Posted by Apoc

Is that Stock Saw (the one you call an automatic hacksaw) something you put together yourself?

The power hacksaw was a kit that was offered in the 50s/60s/70s. Somebody else built it.

It's either worn or they were a hack instead of a machine builder.

'73 H1 Triple · 09-15-2012, 11:49 PM

The lathe is in the basement and wired up.

No pics of loading, I forgot my camera

Here's the lathe at home on my former neighbors dual axle trailer

Put the rollers ( borrowed from work ) under the 4x4s ( lag bolted to the frame) and rolled it back to the ramps. Took the front rollers off and used my 3 ton floor jack to keep the 4x4s about a 1/4" off the ramps.

Neighbor John on the left and neighbor Vic on the right

Used the come a long to slowly lower the lathe down the ramp. When the back rollers reached the ramp, 1-1/2" pipe (four pieces) were used until the front reached the ground. Then the rollers went on the front and the pipes were used in the back.

Finally got it in place

( see it on the left side where I removed a wall to get it in? )

First cut, facing an exhaust spigot after welding to make sure it's flat. The lathe works great

Gas Man · 09-17-2012, 01:27 PM

Nice!!!

09-12-2012, 01:52 PM	#11
Apoc For Science. You Monster. Join Date: Nov 2008 Location: Canada Moto: '08 HD FLSTSB Posts: 3,546	Awesome, as a machinist, I would love my own lathe. I've bid on a couple, but no luck. __________________ Android OS causes gay. Dont let your child use Android (unless she's a hot female). And dont let your babies grow up to be cowboys, either.

09-13-2012, 11:36 AM	#15
Apoc For Science. You Monster. Join Date: Nov 2008 Location: Canada Moto: '08 HD FLSTSB Posts: 3,546	Is that Stock Saw (the one you call an automatic hacksaw) something you put together yourself? __________________ Android OS causes gay. Dont let your child use Android (unless she's a hot female). And dont let your babies grow up to be cowboys, either.

09-17-2012, 01:27 PM	#18
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Nice!!! __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

09-15-2012, 11:49 PM	#17
'73 H1 Triple restorer of the original Join Date: Mar 2008 Location: Zionsville,PA Moto: '93 ZR1100 &'73 Kawasaki H1 500 Posts: 1,331	The lathe is in the basement and wired up. No pics of loading, I forgot my camera Here's the lathe at home on my former neighbors dual axle trailer Put the rollers ( borrowed from work ) under the 4x4s ( lag bolted to the frame) and rolled it back to the ramps. Took the front rollers off and used my 3 ton floor jack to keep the 4x4s about a 1/4" off the ramps. Neighbor John on the left and neighbor Vic on the right Used the come a long to slowly lower the lathe down the ramp. When the back rollers reached the ramp, 1-1/2" pipe (four pieces) were used until the front reached the ground. Then the rollers went on the front and the pipes were used in the back. Finally got it in place ( see it on the left side where I removed a wall to get it in? ) First cut, facing an exhaust spigot after welding to make sure it's flat. The lathe works great