Cave's HID install

Gas Man · 08-31-2010, 10:12 AM

So last winter I did an HID install on my Ultra. It has gotten rave reviews all year. Anybody that has seen it knows what I'm talking about. Mine was the proto-type. I don't know of anybody that has done the setup I have. Not with HID's in the aux lights and with full out timer delays to save on battery power prior to motor start up.

You have to order 2 sets of HIDs from DDM
1 - H4 hi/lo 55W 8K
1 - H3 35W 6K
1 - adjure aux light lens replacements
2 - wolsentech TDRs
1 - power block (8ga in: 4 outs)
6' - 8ga wire
2 - inline fuses (20A & 30A)

For his, he didn't need the leap of faith I had to. He knows the setup works. And for the record, Cave... "You're dead to me".

So here we go.

Tear it down

This needs to go

In here

Pull the seat and battery cover so you can run the 8ga wire to the front. This is a better setup. Giving you planety of battery power for anything you run in the fairing. In this case HIDs, and with one slot empty on the power block, his up coming hogtunes amp.

Run the 8ga wire under the dash and into the fairing...

Mock up with cardboard first for the panels to hold all the stuff for this HID install

We then mocked up with some thin galvanized cause he hadn't gotten his sheet metal yet.

Then work on blowing the 1" hole in the back of the stock HD buckets. This is a 3/4 in hole I drilled

Then I dremmeled the hole out to 1"

Got about half way thru the dremmel job

and figured I should pass this off to Cave... it's his bike afterall... let him make some sparks

Got some good fender sheet metal, transferred the galvonized templates over to that, cut out, trim some more, prime, paint... install.

Other side holds the headlight and one aux light ballast. The far end ballast is on top of the radio.

We started wiring everything, and of coarse it all was soldiered

08-31-2010, 10:12 AM	#1
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Cave's HID install So last winter I did an HID install on my Ultra. It has gotten rave reviews all year. Anybody that has seen it knows what I'm talking about. Mine was the proto-type. I don't know of anybody that has done the setup I have. Not with HID's in the aux lights and with full out timer delays to save on battery power prior to motor start up. You have to order 2 sets of HIDs from DDM 1 - H4 hi/lo 55W 8K 1 - H3 35W 6K 1 - adjure aux light lens replacements 2 - wolsentech TDRs 1 - power block (8ga in: 4 outs) 6' - 8ga wire 2 - inline fuses (20A & 30A) For his, he didn't need the leap of faith I had to. He knows the setup works. And for the record, Cave... "You're dead to me". So here we go. Tear it down This needs to go In here Pull the seat and battery cover so you can run the 8ga wire to the front. This is a better setup. Giving you planety of battery power for anything you run in the fairing. In this case HIDs, and with one slot empty on the power block, his up coming hogtunes amp. Run the 8ga wire under the dash and into the fairing... Mock up with cardboard first for the panels to hold all the stuff for this HID install We then mocked up with some thin galvanized cause he hadn't gotten his sheet metal yet. Then work on blowing the 1" hole in the back of the stock HD buckets. This is a 3/4 in hole I drilled Then I dremmeled the hole out to 1" Got about half way thru the dremmel job and figured I should pass this off to Cave... it's his bike afterall... let him make some sparks Got some good fender sheet metal, transferred the galvonized templates over to that, cut out, trim some more, prime, paint... install. Other side holds the headlight and one aux light ballast. The far end ballast is on top of the radio. We started wiring everything, and of coarse it all was soldiered __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product Last edited by Gas Man; 08-31-2010 at 10:36 PM..