GP shift adjustment hint

ceo012384 · 05-02-2008, 06:14 PM

This is for an 06 R6 but the principle is the same for any bike with a similar shift setup that has tight frame clearances around the rod/tranny connection.

A little hint that matches my preferences. After you switch over to GP shift, with the stock linkage, you will notice that the shift rod needs a LOT of adjustment to get back to the same position it was in. In addition to that, I like to adjust the pedal further to put it up fairly high. This makes it easy to get my foot underneath it, as well as making it easy to click off a clutchless upshift while hanging off the right side of the bike.

To get the pedal high, I just adjusted the shifter so that when it is pressed all the way down, i.e. it's farthest point during a shift, the knob JUST clears the frame.

Like this:

Nicely adjusted:

Trip · 05-02-2008, 06:20 PM

or just crash your bike and be forced to buy new rearsets that do it easy.

ceo012384 · 05-02-2008, 06:21 PM

Quote:

Originally Posted by Trip

or just crash your bike and be forced to buy new rearsets that do it easy.

Right, your tactic works too

Yeah, the aftermarket ones usually come with their own shift rod so the length is right in the middle of the adjustment range and they don't interfere with the frame and such.

After riding on the track with stock pegs and not being able to hang off as far as I would have liked due to the pegs not having enough grip, I'd like some woodcraft rearsets.

DLIT · 05-02-2008, 10:19 PM

GP shift is the shit.

ceo012384 · 05-02-2008, 11:12 PM

Quote:

Originally Posted by DLIT

GP shift is the shit.

No joke. Try adjusting the pedal further up like I said in the first post, you'll like it even better. So easy to get my foot under that bitch. And clicking down on it is easy as pie.

DLIT · 05-02-2008, 11:15 PM

Quote:

Originally Posted by ceo012384

No joke. Try adjusting the pedal further up like I said in the first post, you'll like it even better. So easy to get my foot under that bitch. And clicking down on it is easy as pie.

I already went through all then when I did it like two years ago. Even dremeled me a nice little notch for the shift lever so it wouldn't rub the middle fairing.

05-02-2008, 06:14 PM	#1
ceo012384 Pompous Prick Join Date: Mar 2008 Location: MA Moto: 06 R6 (race), 04 CRF Tard (race) Posts: 3,040	GP shift adjustment hint This is for an 06 R6 but the principle is the same for any bike with a similar shift setup that has tight frame clearances around the rod/tranny connection. A little hint that matches my preferences. After you switch over to GP shift, with the stock linkage, you will notice that the shift rod needs a LOT of adjustment to get back to the same position it was in. In addition to that, I like to adjust the pedal further to put it up fairly high. This makes it easy to get my foot underneath it, as well as making it easy to click off a clutchless upshift while hanging off the right side of the bike. To get the pedal high, I just adjusted the shifter so that when it is pressed all the way down, i.e. it's farthest point during a shift, the knob JUST clears the frame. Like this: Nicely adjusted: __________________ LRRS/CCS #123 Boston Moto Dunlop Woodcraft 35 Motorsports Sidi Pit Bull K&N Filters

05-02-2008, 10:19 PM	#4
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	GP shift is the shit. __________________ Dress for the crash. Not the ride.