ZX-14 shock on the SV

Particle Man · 06-06-2010, 03:26 PM

Well, I finally took the plunge and put a ZX-14 shock on my SV. I've been riding the SV with the stock rear shock for the past 7 years thinking (apparently incorrectly) that everything was working well. For those that don't know, the stock suspension on the SV is set up on something of a budget. For folks that are lighter, it tends to not be a problem. However, I'm not lighter

so for those of us that are a bit more, uh, insulated, a better (read: more heavily sprung and adjustable) shock is usually best.

Unfortunately, a nice aftermarket shock would be close to and/or over a grand. However, there are some shocks that are pretty darn close to the length of the SV's shock. For my weight, riding style, and occasional 2up riding, the ZX-14 shock would be ideal.

I managed to score a ZX-14 rear shock from eBay for under $100 and it's been sitting in the garage for the past 2 weeks - I've been putting it off thinking it'd be a huge PITA to install.

I finally decided to just freakin' do it... I put the SV up on the center stand (probably the single most useful aftermarket part I've put on the bike to date), unbolted the dog bones, unbolted the shock, and then snuck it out through the bottom. After some creative movement of the little rubber flap on the swing-arm, I managed to sneak the new shock into the space, lined it up, and it almost dropped right in. Minor thing: I needed to Dremel the top of the new shock just the tiniest bit to get it to slide into the slot. That took about 2 minutes total after which, the shock dropped right in. I then tightened everything back up, put the dog bones back on, torqued everything to spec and pulled the bike off the center stand.

At first, I thought I hadn't done something right... the bike normally drops quite a bit when I take it off the center stand and it settles onto the tires. Not so this time. I proceeded to check everything to make sure there was no binding and found none... Apparently the new shock was already doing it's job.

I checked one more time to make sure everything was bolted in correctly, and then went for a ride. Holy freakin' CRAP, what a difference. It was like the rear wheel was glued to the road. I couldn't believe the difference in the handling.

I'll be spending the next week or so dialing the new shock in (the old shock had adjustable pre-load only while this one has hi/low dampening etc). Either way, it was definitely a worth-while mod. End-to-end, it took me about 20-25 minutes to install (I guess I shouldn't have put it off

). Total cost was just a shade under $100 (you can't reuse the old bottom shock bolt from the SV: it's too short and it actually threads into the stock shock so you're better off just getting the bottom shock bolt for a ZX-14)

Next up, new fork springs, oil, and emulators.

Trip · 06-06-2010, 03:31 PM

Be careful, the dive you will get with the new shock and sucky springs will kill you.

Particle Man · 06-06-2010, 03:35 PM

Quote:

Originally Posted by Trip

Be careful, the dive you will get with the new shock and sucky springs will kill you.

Yeah I am planning on ordering new springs on Monday. I've already got the pre-load cranked up in the meantime and will be taking it easy this week until the new springs are installed. That's one thing I'm not looking forward to doing.

Emulators will come later I think just because of time. Sonic Springs and 15 or 20 weight fork oil should do for now.

Homeslice · 06-06-2010, 03:35 PM

Even for lighter guys like myself, the stock SV suspension sucks. Mine acted like a pogo stick over bumps.

Particle Man · 06-06-2010, 03:47 PM

ok, scratch that, I just ordered .90kg/mm springs.

tommymac · 06-07-2010, 09:31 AM

Quote:

Originally Posted by Particle Man

ok, scratch that, I just ordered .90kg/mm springs.

What you weighing in at? I wound up with a 1.1 spring for the aprilia (now if I can get them installed properly, thats a whole other story

) and guys on the forum recommended 5wt oil.

Not sure what was in there from last year but with the new oil and the older springs it seems better

Dave · 06-06-2010, 03:54 PM

holy crap. bike related threads on fix?

Particle Man · 06-06-2010, 03:55 PM

it's riding season

smileyman · 06-07-2010, 01:10 AM

Get the emulators. They are drop in easy and make a huge diff. My SV was transformed by them.

Switch · 06-07-2010, 01:11 AM

Quote:

Originally Posted by smileyman

Get the emulators. They are drop in easy and make a huge diff. My SV was transformed by them.

this

06-06-2010, 03:26 PM	#1
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	ZX-14 shock on the SV Well, I finally took the plunge and put a ZX-14 shock on my SV. I've been riding the SV with the stock rear shock for the past 7 years thinking (apparently incorrectly) that everything was working well. For those that don't know, the stock suspension on the SV is set up on something of a budget. For folks that are lighter, it tends to not be a problem. However, I'm not lighter so for those of us that are a bit more, uh, insulated, a better (read: more heavily sprung and adjustable) shock is usually best. Unfortunately, a nice aftermarket shock would be close to and/or over a grand. However, there are some shocks that are pretty darn close to the length of the SV's shock. For my weight, riding style, and occasional 2up riding, the ZX-14 shock would be ideal. I managed to score a ZX-14 rear shock from eBay for under $100 and it's been sitting in the garage for the past 2 weeks - I've been putting it off thinking it'd be a huge PITA to install. I finally decided to just freakin' do it... I put the SV up on the center stand (probably the single most useful aftermarket part I've put on the bike to date), unbolted the dog bones, unbolted the shock, and then snuck it out through the bottom. After some creative movement of the little rubber flap on the swing-arm, I managed to sneak the new shock into the space, lined it up, and it almost dropped right in. Minor thing: I needed to Dremel the top of the new shock just the tiniest bit to get it to slide into the slot. That took about 2 minutes total after which, the shock dropped right in. I then tightened everything back up, put the dog bones back on, torqued everything to spec and pulled the bike off the center stand. At first, I thought I hadn't done something right... the bike normally drops quite a bit when I take it off the center stand and it settles onto the tires. Not so this time. I proceeded to check everything to make sure there was no binding and found none... Apparently the new shock was already doing it's job. I checked one more time to make sure everything was bolted in correctly, and then went for a ride. Holy freakin' CRAP, what a difference. It was like the rear wheel was glued to the road. I couldn't believe the difference in the handling. I'll be spending the next week or so dialing the new shock in (the old shock had adjustable pre-load only while this one has hi/low dampening etc). Either way, it was definitely a worth-while mod. End-to-end, it took me about 20-25 minutes to install (I guess I shouldn't have put it off ). Total cost was just a shade under $100 (you can't reuse the old bottom shock bolt from the SV: it's too short and it actually threads into the stock shock so you're better off just getting the bottom shock bolt for a ZX-14) Next up, new fork springs, oil, and emulators. __________________ I'm not "fat." I'm "Enlarged to show texture." Handle every stressful situation like a DOG: If you can't eat it or hump it, pi$$ on it & walk away. Last edited by Particle Man; 06-06-2010 at 03:29 PM..

06-06-2010, 03:47 PM	#5
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	ok, scratch that, I just ordered .90kg/mm springs. __________________ I'm not "fat." I'm "Enlarged to show texture." Handle every stressful situation like a DOG: If you can't eat it or hump it, pi$$ on it & walk away.

06-06-2010, 03:54 PM	#7
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	holy crap. bike related threads on fix? __________________ TWF Post whore #6

06-06-2010, 03:55 PM	#8
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	it's riding season __________________ I'm not "fat." I'm "Enlarged to show texture." Handle every stressful situation like a DOG: If you can't eat it or hump it, pi$$ on it & walk away.

06-07-2010, 01:10 AM	#9
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	Get the emulators. They are drop in easy and make a huge diff. My SV was transformed by them. __________________ Arkriders.com To be the best you must first be willing to risk the worst!

06-06-2010, 03:35 PM	#4
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	Even for lighter guys like myself, the stock SV suspension sucks. Mine acted like a pogo stick over bumps.